Owner's Manual

868 | Appendix D. Supported Protocols, MIBs, and Standards
NETGEAR 8800 User Manual
::= { netgearMauType 10 }
"Gigabit LX70, full duplex"
netgearMauType1000BaseZXHD OBJECT IDENTIFIER
::= { netgearMauType 11 }
"Gigabit ZX, half duplex"
netgearMauType1000BaseZXFD OBJECT IDENTIFIER
::= { netgearMauType 12 }
"Gigabit ZX, full duplex"
Corresponding MAU Type List Bits values have been added:
netgear_ifMauTypeListBits_b1000baseWDMHD-- 64
netgear_ifMauTypeListBits_b1000baseWDMFD-- 65
netgear_ifMauTypeListBits_b1000baseLX70HD-- 66
netgear_ifMauTypeListBits_b1000baseLX70FD-- 67
netgear_ifMauTypeListBits_b1000baseZXHD-- 68
netgear_ifMauTypeListBits_b1000baseZXFD-- 69
The following standards-based additions have been made as a 'Work in Progress', as per
draft-ietf-hubmib-mau-mib-v3-02.txt.
1. A new enumeration 'fiberLC(14)' for the JackType textual convention.
2. New MAU types:
dot3MauType10GigBaseX OBJECT-IDENTITY
STATUS current
DESCRIPTION "X PCS/PMA (per 802.3 section 48), unknown PMD."
::= { dot3MauType 31 }
dot3MauType10GigBaseLX4 OBJECT-IDENTITY
STATUS current
DESCRIPTION "X fiber over WWDM optics (per 802.3 section 53)"
::= { dot3MauType 32 }
dot3MauType10GigBaseR OBJECT-IDENTITY
STATUS current
DESCRIPTION "R PCS/PMA (per 802.3 section 49), unknown PMD."
::= { dot3MauType 33 }
dot3MauType10GigBaseER OBJECT-IDENTITY
STATUS current
DESCRIPTION "R fiber over 1550 nm optics (per 802.3 section 52)"
::= { dot3MauType 34 }
dot3MauType10GigBaseLR OBJECT-IDENTITY
STATUS current
DESCRIPTION "R fiber over 1310 nm optics (per 802.3 section 52)"
::= { dot3MauType 35 }