Owner's Manual

866 | Appendix D. Supported Protocols, MIBs, and Standards
NETGEAR 8800 User Manual
RFC 1724 (RIPv2-MIB)
The following tables, groups, and variables are supported in this MIB.
RFC 1850 (OSPF-MIB)
The following tables, groups, and variables are supported in this MIB.
STP Traps newRoot
topologyChange
dot1dTpFdbTable Supported The object dot1dTpFdbTable displays
ports and FDB mac addresses. They
include both the static and dynamic FDB
entries on the switch. The MIB does not
provide a way to identify the VLAN on
which the entry was learned. The ports
numbers are assumed to be 1 to 128 on
Slot 1, and 128 to 255 on Slot 2, etc. (that
is, with a total of 128 ports on each of the
slots on a Chassis system).
dot1dTpPortTable Supported
dot1dStatic group Supported
Dot1dStaticAllowedToGoTo Not supported
Table/Group Supported Variables Comments
rip2Globals rip2GlobalRouteChanges
rip2GlobalQueries
rip2IfStatTable All objects
rip2IfConfTable All objects
rip2PeerTable Not supported
Table/Group Supported Variables Comments