Owner's Manual

Appendix D. Supported Protocols, MIBs, and Standards | 865
NETGEAR 8800 User Manual
dot1dStp group scalars dot1dStpProtocolSpecification Values for these objects will be returned for
the STP domain 's0' only. For other
domains, see the
NETGEAR-STPEXTENSTIONS-MIB.
dot1dStpPriority
dot1dStpTimeSinceTopologyChange
dot1dStpTopChanges
dot1dStpDesignatedRoot
dot1dStpRootCost
dot1dStpRootPort
dot1dStpMaxAge
dot1dStpHelloTime
dot1dStpHoldTime
dot1dStpForwardDelay
dot1dStpBridgeMaxAge
dot1dStpBridgeHelloTime
dot1dStpBridgeForwardDelay
dot1dStpVersion This object is not present in the original
RFC1493, but is defined in the Internet
draft ‘draft-ietf-bridge-rstp-mib-03.txt’.
dot1dStpTxHoldCount This object is not present in the original
RFC1493, but is defined in the Internet
draft ‘draft-ietf-bridge-rstp-mib-03.txt’.
This object not supported; it always returns
a value of (1). Attempting to set it yields an
error.
dot1dStpPathCostDefault This object is not present in the original
RFC1493, but is defined in the Internet
draft ‘draft-ietf-bridge-rstp-mib-03.txt’.
For this object only 8021d1998(1) is
supported at this time, not
stp802112001(2). Attempting to set (2)
yields an error.
dot1dStpExtPortTable All objects This object is not present in the original
RFC1493, but is defined in the Internet
draft ‘draft-ietf-bridge-rstp-mib-03.txt’.
The object ‘dot1dStpPortProtocolMigration’
is not supported; it always returns a value
of (2). Attempting to set it yields an error.
dot1dStpPortTable All objects
Table/Group Supported Variables Comments