Owner's Manual

862 | Appendix D. Supported Protocols, MIBs, and Standards
NETGEAR 8800 User Manual
Note: Only entries for the default VR are supported.
Standard MIBs
RFC 1213 (MIB-II)
The following tables, groups, and variables are supported in this MIB.
RFC 2233 (IF-MIB)
The following tables, groups, and variables are supported in this MIB.
Table/Group Supported Variables Comments
System group scalars All objects The object 'sysServices' will always return the value '79'.
Interfaces group Supported as per RFC 2233.
IP Group scalars All objects
ipAddrTable All objects
ipRouteTable All objects Supported as read only. Routes are indexed by prefix
only.
ipNetToMediaTable All objects
ICMP group All objects
TCP group scalars All objects
tcpConnTable All objects
UDP group scalars All objects
udpTable All objects
EGP Group Not supported
SNMP group All objects
At group All objects Supported as read only.
Table/Group Supported Variables Comments
IfNumber
ifTable ifIndex The ifIndex for ports is calculated as ((slot * 1000) +
port). For VLANs, the ifIndex starts from 1000001.