Owner's Manual

80 | Chapter 3. Managing the Switch
NETGEAR 8800 User Manual
• Read community strings provide read-only access to the switch. The default read-only
community string is public.
• Read-write community strings provide read- and-write access to the switch. The
default read-write community string is private.
• System contact (optional)—The system contact is a text field that enables you to enter
the name of the person(s) responsible for managing the switch.
• System name (optional)—The system name enables you to enter a name that you have
assigned to this switch. The default name is the model name of the switch (for example,
XCM8806-1.2).
• System location (optional)—Using the system location field, you can enter the location
of the switch.
Displaying SNMP Settings
To display the SNMP settings configured on the switch, use the following command:
show management
This command displays the following information:
• Enable/disable state for Telnet and SNMP access
• Login statistics
• Enable/disable state for idle timeouts
• Maximum number of CLI sessions
• SNMP community strings
• SNMP trap receiver list
• SNMP trap receiver source IP address
• SNMP statistics counter
• SSH access states of enabled, disabled, and module not loaded
• CLI configuration logging
• SNMP access states of v1, v2c disabled and v3 enabled
• Enable/disable state for Remote Monitoring (RMON)
• Access-profile usage configured via Access Control Lists (ACLs) for additional Telnet and
SSH2 security
• CLI scripting settings
• Enable/disable state
• Error message setting
• Persistence mode
• Dropped SNMP packet counter.