Owner's Manual

742 | Chapter 27. Multicast Routing and Switching
NETGEAR 8800 User Manual
configure pim add vlan all dense
enable pim
configure pim state-refresh vlan all on
PIM-SM Configuration Example
In Figure 86, the system labeled ABR1 is configured for IP multicast routing using PIM-SM.
Figure 86. IP Multicast Routing Using PIM-SM Configuration Example
Note: Figure 86 is used in Chapter 24, OSPF to describe the Open
Shortest Path First (OSPF) configuration on a switch. See that
chapter for more information about configuring OSPF.
The router labeled ABR1 has the following configuration:
IR 2
IR 1
Area 0
Area 5
Area 6 (stub)
10.0.1.1
10.0.2.1
10.0.3.1
10.0.3.2
10.0.1.2
10.0.2.2
Headquarters
ABR 2
ABR 1
HQ_10_0_2
HQ_10_0_3
160.26.25.1
160.26.25.2
160.26.26.2
160.26.26.1
Virtual link
Chi_160_26_26
LA_161_48_2
161.48.2.1
161.48.2.2
Chicago
Los Angeles
HQ_10_10_4
Rendezvous
point
EX_mcast_0017