Owner's Manual

666 | Chapter 22. RIP
NETGEAR 8800 User Manual
RIP Configuration Example
Figure 71 illustrates a NETGEAR 8800 switch that has three VLANs defined as follows:
• Finance
• Protocol-sensitive VLAN using the IP protocol.
• All ports on slots 1 and 3 have been assigned.
• IP address 192.207.35.1.
• Personnel
• Protocol-sensitive VLAN using the IP protocol.
• All ports on slots 2 and 4 have been assigned.
• IP address 192.207.36.1.
• MyCompany
• Port-based VLAN.
• All ports on slots 1 through 4 have been assigned.
This example does use protocol-sensitive VLANs that only admit IP packets. This is not a
common requirement for most networks. In most cases, VLANs will admit different types of
packets to be forwarded to the hosts and servers on the network.
Figure 71. RIP Configuration Example
1234AB5678
EX_047
1
MyCompany
2
IP
NetBIOS
IP
NetBIOS
3 4
= IP traffic
= NetBIOS traffic
192.207.36.1192.207.35.1
Finance
192.207.35.0
Personnel
192.207.36.0
IP
NetBIOS
IP
NetBIOS