Owner's Manual

654 | Chapter 21. IPv6 Unicast Routing
NETGEAR 8800 User Manual
Figure 67. IPv6 Unicast Routing Configuration Example
The stations connected to the system generate a combination of IPv6 traffic and NetBIOS
traffic. The IPv6 traffic is filtered by the protocol-sensitive VLANs. All other traffic is directed to
the VLAN MyCompany.
In this configuration, all IPv6 traffic from stations connected to slots 1 and 3 have access to
the router by way of the VLAN Finance. Ports on slots 2 and 4 reach the router by way of the
VLAN Personnel. All other traffic (NetBIOS) is part of the VLAN MyCompany.
The example is configured as follows:
create vlan Finance
create vlan Personnel
create vlan MyCompany
configure Finance protocol ipv6
configure Personnel protocol ipv6
configure Finance add port 1:*,3:*
configure Personnel add port 2:*,4:*
configure MyCompany add port all
configure Finance ipaddress 2001:db8:35::1/48
configure Personnel ipaddress 2001:db8:36::1/48
EX_106
1234AB5678
EX_047
1
MyCompany
2
IPv6
NetBIOS
IPv6
NetBIOS
3 4
= IPv6 traffic
= NetBIOS traffic
2001:db8:36::1/482001:db8:35::1/48
Finance
2001:db8:35::/48
Personnel
2001:db8:36::/48
IPv6
NetBIOS
IPv6
NetBIOS