Owner's Manual

Chapter 20. IPv4 Unicast Routing | 615

NETGEAR 8800 User Manual

isis-level-1 | isis-level-1-external | isis-level-2 | isis-level-2-external]

[cost

<cost> type [ase-type-1 | ase-type-2] {tag <number>} | <policy-map>] 

or 

isis-level-1| isis-level-1-external | isis-level-2 | isis-level-2-external]

Verifying the Routing Configuration

The following sections describe ways to view the routing configuration:

• Viewing IP Routes on page 615

• Viewing the IP ARP Table on page 615

• Viewing IP ARP Statistics on page 615

• Viewing the IP Configuration for a VLAN on page 615

• Viewing Compressed Routes on page 615

Viewing IP Routes

Use the show iproute command to display the current configuration of IP unicast routing for

the switch and for each VLAN. The

show iproute command displays the currently configured

routes and includes how each route was learned.

Viewing the IP ARP Table

To view the IP ARP table entries, use the show iparp command.

Viewing IP ARP Statistics

To view IP ARP table statistics, use the following commands:

show iparp stats [[ <vr_name> | vr {all | <vr_name>} ] {no-refresh} | {vr}

summary]

show iparp stats [vlan {all {vr <vr_name>}} | {vlan} <vlan_name>] {no-refresh}

show iparp stats ports {all | <port_list>} {no-refresh}

Viewing the IP Configuration for a VLAN

To view the IP configuration for one or more VLANs, use the show ipconfig command.

Viewing Compressed Routes

View a compressed route using the following command: