Owner's Manual

Chapter 18. STP | 581
NETGEAR 8800 User Manual
configure stpd s0 mode mstp cist
configure stpd s0 priority 32768 (Default)
enable stpd s0 auto-bind vlan Default
enable stpd s0
create stpd s1
configure stpd s1 mode mstp msti 1
configure stpd s1 priority 32768 (Default)
enable stpd s1 auto-bind vlan finance
configure stpd s1 ports link-type point-to-point 2-3
enable stpd s1
In the following example, the commands configure switch D, the external switch. Switch D
becomes the CIST root bridge:
create stpd s0 (Default)
configure stpd s0 mode dot1w
configure stpd s0 priority 28672
enable stpd s0 auto-bind vlan Default
configure stpd s0 ports link-type point-to-point 4-5
enable stpd s0