Owner's Manual

536 | Chapter 18. STP
NETGEAR 8800 User Manual
• Configured the mode of operation for the STPD
• Configured the STP ports
• Enabled STPD
The following example shows how to configure STPD BPDU tunneling on devices running
XCM8800:
Switch A
enable ignore-bpdu vlan v1
enable ignore-bpdu vlan v2
enable ignore-bpdu vlan v3
configure vlan v1 add ports 1:1,2:1 tagged stpd s1
configure vlan v2 add ports 1:2,2:1 tagged stpd s2
configure vlan v3 add ports 1:3,2:1 tagged stpd s3
Switch B
enable ignore-bpdu vlan v1
enable ignore-bpdu vlan v2
configure vlan v1 add ports 1:1,2:1 tagged stpd s1
configure vlan v2 add ports 1:2,2:1 tagged stpd s2
Switch C
enable ignore-bpdu vlan v1
enable ignore-bpdu vlan v3
configure vlan v1 add ports 1:1,2:1 tagged stpd s1
configure vlan v3 add ports 1:3,2:1 tagged stpd s3
The following example shows how to configure STPD BPDU tunneling on devices running
XCM8800:
Switch A
configure vlan v1 add ports 1:1,2:1 tagged
configure vlan v2 add ports 1:2,2:1 tagged
configure vlan v3 add ports 1:3,2:1 tagged
configure stpd s1 add vlan v1 ports 1:1
configure stpd s2 add vlan v2 ports 1:2
configure stpd s3 add vlan v3 ports 1:3
disable s1
disable s2
disable s3
Switch B
configure vlan v1 add ports 1:1,2:1 tagged
configure vlan v2 add ports 1:2,2:1 tagged
configure stpd s1 add vlan v1 ports 1:1