Owner's Manual

42 | Chapter 2. Getting Started

NETGEAR 8800 User Manual

message on the startup screen. The message is slightly different, depending on whether you

are working on a modular switch or a stand-alone switch.

The following sample shows the startup screen if any of the slots in a modular switch are shut

down as a result of the system recovery configuration:

password:

XCM8800

Protected by US Patent Nos: 6,678,248; 6,104,700; 6,766,482; 6,618,388; 6,034,957;

6,859,438; 6,912,592; 6,954,436; 6,977,891; 6,980,550; 6,981,174; 7,003,705; 7,01

2,082.

==============================================================================

Press the <tab> or '?' key at any time for completions.

Remember to save your configuration changes.

The I/O modules in the following slots are shut down: 1,3

Use the "clear sys-recovery-level" command to restore I/O modules

! XCM8806-8810.1 #

When an exclamation point (!) appears in front of the command line prompt, it indicates that

one or more slots or the entire stand-alone switch are shut down as a result of your system

recovery configuration and a switch error. (See

Chapter 8, Status Monitoring and Statistics for

complete information on system recovery and system health check features.)

The following sample shows the startup screen if a stand-alone switch is shut down as a

result of the system recovery configuration: