Owner's Manual

Chapter 16. Network Login | 419
NETGEAR 8800 User Manual
configure vlan “corp” add port 1:11 untagged
configure vlan “corp” add port 1:12 untagged
configure vlan “corp” add port 1:13 untagged
configure vlan “corp” add port 1:14 untagged
# Network Login Configuration
configure vlan “temp” dhcp-address-range 198.162.32.20 - 198.162.32.80
configure vlan “temp” dhcp-options default-gateway 198.162.32.1
configure vlan “temp” dhcp-options dns-server 10.0.1.1
configure vlan “temp” dhcp-options wins-server 10.0.1.85
configure netlogin vlan “temp”
enable netlogin web-based
enable netlogin ports 1:10-1:14,4:1-4:4 web-based
configure netlogin base-url "network-access.net" (Default)
configure netlogin redirect-page http://www.netgear.com (Default)
enable netlogin logout-privilege (Default)
disable netlogin session-refresh 3 (Default)
# DNS Client Configuration
configure dns-client add name-server 10.0.1.1
configure dns-client add name-server 10.0.1.85
#RADIUS Client Configuration
configure radius netlogin primary server 10.0.1.2 1812 client-ip 10.10.20.30 vr
“Vr-Mgmt”
configure radius netlogin primary shared-secret purple
enable radius
For this example, the following lines (for a FreeRADIUS server) should be added to the
RADIUS server users file for each user:
Netgear : Netgear -Netlogin-Only = Enabled (if no CLI authorization)
Netgear : Netgear -Netlogin-Vlan = "corp" (destination vlan for CAMPUS mode network
login)
Note: For information about how to use and configure your RADIUS
server, see
Configuring the RADIUS Client on page 475 and the
documentation that came with your RADIUS server.
Web-Based Authentication User Login
To use web-based authentication: