Owner's Manual

Chapter 16. Network Login | 401
NETGEAR 8800 User Manual
Passwords are case-sensitive. Passwords must have a minimum of 0 characters and a
maximum of 32 characters. If you attempt to create a password with more than 32
characters, the switch displays the following message after you re-enter the password:
Password cannot exceed 32 characters
The following example modifies the password for the existing local network login account
megtest. The following is a sample display from this command:
configure netlogin local-user megtest
password: <Enter the new password. The switch does not display the password.>
Reenter password: <Re-enter the new password. The switch does not display the
password.>
After you complete these steps, the password has been updated.
Updating VLAN Attributes
You can add a destination VLAN, change the destination VLAN, or remove the destination
VLAN from an existing local network login account. To make any of these VLAN updates, use
the following command:
configure netlogin local-user <user-name> {vlan-vsa [[{tagged | untagged}
[<vlan_name> | <vlan_tag>]] | none]}
With the following:
• user_name—Specifies the name of the existing local network login account
• tagged—Specifies that the client be added as tagged
• untagged—Specifies that the client be added as untagged
• vlan_name—Specifies the name of the destination VLAN
• vlan_name_tag—Specifies the VLAN ID, tag, of the destination VLAN
• none—Specifies that the VSA 211 wildcard (*) is applied, only if you do not specify tagged
or untagged
Displaying Local Network Login Accounts
To display a list of local network login accounts on the switch, including VLAN information,
use the following command:
show netlogin local-users
Deleting a Local Network Login Account
To delete a local network login user name and password, use the following command:
delete netlogin local-user <user-name>