Owner's Manual

372 | Chapter 15. QoS
NETGEAR 8800 User Manual
• Controlling Flooding, Multicast, and Broadcast Traffic on Ingress Ports on page 385
Platform Configuration Procedures
The following sections provide summary configuration procedures for the NETGEAR 8800.
Figure 24 shows the QoS configuration components for NETGEAR 8800 switches.
Figure 24. QoS on NETGEAR 8800 Switches
The following sections provide information on configuring QoS:
• QoS Configuration Guidelines for NETGEAR 8800 Switches on page 372
• Configuration Summary for NETGEAR 8800 Switches on page 373
QoS Configuration Guidelines for NETGEAR 8800 Switches
The following considerations apply only to QoS on the NETGEAR 8800 switches:
• The following QoS features share resources:
• ACLs
• dot1p
• VLAN-based QoS
• Port-based QoS
• You might receive an error message when configuring a QoS feature in the above list; it is
possible that the shared resource is depleted. In this case, unconfigure one of the other
QoS features and reconfigure the one you are working on.
• This QoS profile is reserved for system control traffic.