Owner's Manual

308 | Chapter 13. ACLs
NETGEAR 8800 User Manual
Destination-port {<number> |
<range>}
TCP or UDP destination port. You must also specify the
protocol match condition to determine which protocol is being
used on the port, any time you use the this match condition. In
place of the numeric value, you can specify one of the
following text synonyms (the field values are also listed):
afs(1483), bgp(179), biff(512), bootpc(68), bootps(67),
cmd(514), cvspserver(2401), DHCP(67), domain(53),
eklogin(2105), ekshell(2106), exec(512), finger(79), ftp(21),
ftp-data(20), http(80), https(443), ident(113), imap(143),
kerberos-sec(88), klogin(543), kpasswd(761), krb-prop(754),
krbupdate(760), kshell(544), idap(389), login(513),
mobileip-agent(434), mobileip-mn(435), msdp(639),
netbios-dgm(138), netbios-ns(137), netbios-ssn(139),
nfsd(2049), nntp(119), ntalk(518), ntp(123), pop3(110),
pptp(1723), printer(515), radacct(1813), radius(1812),
rip(520), rkinit(2108), smtp(25), snmp(161), snmptrap(162),
snpp(444), socks(1080), ssh(22), sunrpc(111), syslog(514),
tacacs-ds(65), talk(517), telnet(23), tftp(69), timed(525),
who(513), xdmcp(177), zephyr-clt(2103), or zephyr-hm(2104).
TCP, UDP/Ingress
and Egress
TCP-flags <bitfield> TCP flags. Normally, you specify this match in conjunction with
the protocol match statement. In place of the numeric value,
you can specify one of the following text synonyms (the field
values are also listed): ACK(0x10), FIN(0x01), PUSH(0x08),
RST(0x04), SYN(0x02), URG(0x20), SYN_ACK(0x12).
TCP/Ingress and
Egress
IGMP-msg-type <number> IGMP message type. Possible values and text synonyms:
v1-report(0x12), v2-report(0x16), v3-report(0x22), V2-leave
(0x17), or query(0x11).
IGMP/Ingress and
Egress
Table 31. ACL Match Conditions (Continued)
Match Conditions Description Applicable 
IP Protocols/
Direction