Owner's Manual

Chapter 9. VLANs | 251
NETGEAR 8800 User Manual
• Protocol information
• QoS profile information
• Rate shaping information
• NetLogin information
• Ports assigned
• Tagged/untagged status for each port
• How the ports were added to the VLAN
• Number of VLANs configured on the switch
• IP forwarding information
• Multicasting information
• Routing protocol information
Use the detail option to display the detailed format.
Note: To display IPv6 information, you must use either the show vlan
detail
command or show vlan command with the name of the
specified VLAN.
You can display additional useful information on VLANs configured with IPv6 addresses by
issuing the
show ipconfig ipv6 vlan <vlan_name> command.
Displaying Protocol Information
To display protocol information, use the following command:
show protocol {<name>}
This show command displays protocol information, which includes:
• Protocol name
• Type
• Value
Private VLANs
The section covers the following Private VLAN (PVLAN) topics:
• PVLAN Overview on page 252
• Configuring PVLANs on page 260
• Displaying PVLAN Information on page 263
• PVLAN Configuration Example 1 on page 264