Owner's Manual

Chapter 8. Status Monitoring and Statistics | 227
NETGEAR 8800 User Manual
The uploaded messages can be formatted differently from the format configured for the
targets, and you can choose to upload the messages in order of newest to oldest or in
chronological order (oldest to newest).
Displaying Counts of Event Occurrences
EMS adds the ability to count the number of occurrences of events. Even when an event is
filtered from all log targets, the event is counted. To display the event counters, use the
following command:
show log counters {<event condition> | [all | <event component>]} {include |
notified | occurred} {severity <severity> {only}}}
The system displays two counters. One counter displays the number of times an event has
occurred, and the other displays the number of times that notification for the event was made
to the system for further processing. Both counters reflect totals accumulated since reboot or
since the counters were cleared using the
clear log counters or clear counters command.
The show log counters command also displays an included flag (the column titled In in the
output). The included flag is set to Y(es) if one or more targets are receiving notifications of
this event without regard to matching parameters.
The keywords include, notified, and occurred display events only with non-zero counter
values for the corresponding counter.
The output of the command:
show log counters stp.inbpdu severity debug-summary
is similar to the following:
Comp SubComp Condition Severity Occurred In Notified
------- ----------- ----------------------- ------------- -------- -- --------
STP InBPDU Drop Error 0 Y 0
STP InBPDU Ign Debug-Summary 0 N 0
STP InBPDU Mismatch Warning 0 Y 0
Occurred : # of times this event has occurred since last clear or reboot
Flags : (*) Not all applications responded in time with there count values
In(cluded): Set to Y(es) if one or more targets filter includes this event
Notified : # of times this event has occurred when 'Included' was Y(es)
The output of the command:
show log counters stp.inbpdu.drop
is similar to the following:
Comp SubComp Condition Severity Occurred In Notified
------- ----------- ----------------------- ------------- -------- -- --------
STP InBPDU Drop Error 0 Y 0