Owner's Manual

190 | Chapter 7. PoE
NETGEAR 8800 User Manual
• MIB Detect Status
• Label
• Operator Limit
• PD Class
• Max Allowed Power
• Measured Power
• Line Voltage
• Current
• Fault Status
• Detailed Status
• Priority
Displaying Port PoE Statistics
To display the PoE statistics for each port, use the following command:
show inline-power stats ports <port_list>
The command provides the following information:
• State—Displays the port power state:
• Disabled
• Searching
• Delivering
• Faulted
• Disconnected
• Other
• Denied
• PD’s power class—Displays the class type of the connected PD:
• “-----”: disabled or searching
• “class0”: class 0 device
• “class1”: class 1 device
• “class2”: class 2 device
• “class3”: class 3 device
• “class4”: class 4 device
• Absent—Displays the number of times the port was disconnected
• InvSig—Displays the number of times the port had an invalid signature
• Denied—Displays the number of times the port was denied
• Over-current—Displays the number of times the port entered an overcurrent state
• Short—Displays the number of times the port entered undercurrent state