Owner's Manual

Chapter 7. PoE | 187
NETGEAR 8800 User Manual
• Not operational
• Disabled
• Subsystem failure
• Card not present
• Slot disabled
• Budgeted power—The amount of inline power, in watts, that is reserved and available to
the slot.
• Measured power—The amount of power, in watts, that is currently being used by the slot.
Displaying System Power Data
Additionally, you can view the distribution of power, as well as currently required and
allocated power, on the entire modular switch including the power supplies by using the
following command:
show power budget
Displaying Slot PoE Information on NETGEAR 8800 Switches
You can display PoE status and statistics per slot.
Displaying Slot PoE Status
To display PoE status for each slot, use the following command:
show inline-power slot <slot>
The command provides the following information:
• Inline power status—The status of inline power. The status conditions are:
• Enabled
• Disabled
• Firmware status—The operational status of the slot. The status conditions are:
• Operational
• Not operational
• Disabled
• Subsystem failure
• Card not present
• Slot disabled
• Budgeted power—The amount of power, in watts, that is available to the slot.
• Measured power—The amount of power, in watts, that is currently being used by the slot.
Displaying Slot PoE Statistics on NETGEAR Switches
To display the PoE statistics for each slot, use the following command: