Owner's Manual

Chapter 3. Troubleshooting | 29
XAV101v2 Powerline AV 200 Adapter User Manual
4. Click the Use default Encryption Key button, and then click the Apply Security to
Selected Devices button.
5. Select the Device Settings tab, and check that the utility detects all the Powerline AV 200
Adapters in your Powerline network.
If the utility detects all your Powerline devices, you can specify a new network encryption key
as described in
Adding a Device to a Powerline Network in Chapter 2. If the utility does not
detect them all, see the following section, Changing the Network Encryption Key for One Unit
at a Time .
Changing the Network Encryption Key for One Unit at a Time
If the utility does not detect all the devices, you must connect your computer to each
Powerline device and set up the network encryption key for one device at a time, as follows:
1. Select the Advanced Settings tab in the XAV101v2 Powerline Utility.
2. Type the network encryption key that you want to assign in the Create a new Encryption Key
field, and then click Apply Security to Selected Devices.
3. Select the Device Settings tab, and then click Refresh. Check that the utility detects all the
devices that have been individually set to the same network encryption key.