Owner's Manual

Chapter 2. Using the XAV101v2 Powerline Utility | 15
XAV101v2 Powerline AV 200 Adapter User Manual
Device Settings Tab
When launched, the Powerline Utility opens to the Device Settings tab. If all devices are not
shown, click the Refresh button to detect all Powerline Adapters on your network.
Figure 1.
Note: You might see a message at the bottom of the screen regarding the
power saving feature. If the unit goes into power saving mode, the
Powerline Utility will not find it. Keeping a connected Ethernet cable
plugged into the device will keep it active.
By clicking the light in the LED Status column, you can toggle the LED between on and off.