Operation Manual

XAV1004 Powerline AV Ethernet Adapter User Guide
Installation and Basic Configuration 1-5
v1.1, September 2009
XAV1004 Label
The label on the rear panel of the XAV1004 contains the items listed below.
• Model number
• MAC address
• Serial number
• Device password (PWD)
Table 1-2. XAV1004 Ethernet Ports and Buttons
Item Description
Ethernet ports Use these four ports to connect to connect the XAV1004 to peripheral devices, such
as gaming consoles, DVD players, internet phones, or storage devices. The ports
use a QoS priority algorithm to determine levels of service. For more information
about connecting devices to these ports, see “Connecting Devices to the XAV1004”
on page 1-7.
Security button Configure security (see “Changing the Default Encryption Key using Push 'N' Secure”
on page 2-2).
Reset button To reset, use a sharp object such as a pen or a paper clip to briefly press and hold
this button (for no more than two seconds). The adapter automatically returns to
factory default settings, and then restarts.
Note: Pressing the reset button longer than recommended may interfere with
resetting the adapter.
Figure 1-4