Operation Manual

XAV1004 Powerline AV Ethernet Adapter User Guide
Installation and Basic Configuration 1-4
v1.1, September 2009
XAV1004 Rear View
The front view of the XAV1004 is shown in the following illustration:
Ethernet ports Use these four ports to connect to connect the XAV1004 to peripheral devices, such
as gaming consoles, DVD players, internet phones, or storage devices. The ports
use a QoS priority algorithm to determine levels of service. For more information
about connecting devices to these ports, see “Connecting Devices to the XAV1004”
on page 1-7.
Security button Configure security (see “Changing the Default Encryption Key using Push 'N' Secure”
on page 2-2).
Reset button To reset, use a sharp object such as a pen or a paper clip to briefly press and hold
this button (for no more than two seconds). The adapter automatically returns to
factory default settings, and then restarts.
Note: Pressing the reset button longer than recommended may interfere with
resetting the adapter.
Figure 1-3
Table 1-1. XAV1004 LEDs (continued)
Item Description (continued)
Ethernet
ports
Security
button
Reset
button
Power