Owner's Manual

Table 1. Front panel LED descriptions
LED Description
Power/
Check
• Solid green. Power is supplied to the router.
• Blinking green. The
router is starting up.
• Off. Power is not supplied to the router.
Wireless
• Blinking green. Data is being transmitted or received over the wireless link.
• Off.
The wireless radio is turned off.
Internet
• Solid green. The Internet connection is established.
• Blinking green.
There is traffic on the Internet port.
• Off. No Internet connection.
Ethernet
(1, 2)
• Solid green. The LAN port has detected an Ethernet link with a device such as a computer.
• Blinking green. Data is being transmitted or received.
• Off. No link is detected on this port.
Hardware Setup
9
N150 2-Port Wireless Router WNR612v3
Back Panel
The back panel has the connections shown in the following figure.
Ethernet
Internet
Power On/Off
Power connector
port
LAN ports (2)
Reset
button
Figure 3. Router, rear view
See Factory Settings on page 89 for information about restoring factory settings.