Owner's Manual

NETGEAR genie Advanced Home

N150 2-Port Wireless Router WNR612v3

• To use the push button method, either click the WPS button on this screen or press

the WPS button on the side of the router. Within 2 minutes, go to the wireless client

and press its WPS button to join the network without entering a password.

• T

o use the PIN method, select the PIN Number radio button, enter the client security

PIN, and click Next.

Within 2 minutes, go to the client device and use its WPS software to join the network

without entering a password.

The router attempts to add the WPS-capable device.

4. Repeat Step 2 and Step 3 to add another WPS client to your network.

Setup Menu

 To display the Setup menu:

Select Advanced > Setup to display the Setup menu.

The following selections are available:

• Internet Setup. Go to the same Internet Setup screen that you can access from the

dashboard on the Basic Home screen. See Internet Settings on page 19.

• W

ireless Setup. Go to the same Wireless Settings screen that you can access from

the dashboard on the Basic Home screen. See Basic Wireless Settings on page 24.

• Guest Network.

This is a shortcut to the same Guest Network screen that you can

access from the dashboard on the Basic Home screen. See FastLane on page 29.

• W

AN Setup. Internet (WAN) setup. See WAN Setup on page 33.

• LAN Setup. Local area network (LAN) setup. See LAN Setup on page 37.

• QoS Setup. Quality of Service (QoS) setup. See Quality of Service (QoS) Setup on

page 40.

WAN Setup

The WAN Setup screen lets you configure a DMZ (demilitarized zone) server, change the

Maximum Transmit Unit (MTU) size, and enable the router to respond to a ping on the WAN

(Internet) port.