Owner's Manual

Chapter 2: Wireless Configuration | 23
Wireless-N 150 Router WNR612v2 User Manual
2. Select Wireless Settings under Advanced in the main menu. The advanced Wireless
Settings screen displays:
The available settings in this screen are:
• Enable Wireless Router Radio. If you disable the wireless router radio, wireless
devices cannot connect to the wireless router. If you will not be using your wireless
network for a period of time, you can clear this check box and disable all wireless
connectivity.
• Fragmentation Length, CTS/RTS Threshold, and Preamble Mode. The
Fragmentation Length, CTS/RTS Threshold, and Preamble Mode options are
reserved for wireless testing and advanced configuration only. Do not change these
settings.
• Transmit Power Control. There are four different settings for transmit power control:
100% (the default), 75%, 50%, and 25%.
• WPS Settings. For information about these settings, see Using Push 'N' Connect
(WPS) to Configure Your Wireless Network on page 18.
• Wireless Card Access List. For information about this list, see Restricting Wireless
Access by MAC Address on page 24.
.
Advanced WPS Settings
On the Advanced Wireless Setting screen, these WPS Settings are available:
• Router’s PIN. The PIN is displayed so that you can use it to configure the router
through WPS (Wi-Fi Protected Setup). It is also displayed on the router’s label.
• Disable Router’s PIN. If the router’s PIN is disabled, you cannot configure the
router’s wireless settings with WPS. However, if your settings are already configured,
you can still add WPS-enabled wireless clients. The router might disable the PIN if it
detects suspicious attempts to break into your wireless settings; this can happen if the