Owner's Manual

Advanced Settings
96
N450 Wireless Router WNR2500
A screen similar to the following displays:
6. In the Service Name field, type a descriptive service name.
7. In the Service User list, select Any (the default) to allow any computer on the Internet to use
this service.
Otherwise, select Single address, and enter the IP address of one computer to restrict
the service to a particular computer
.
8. In the Service T
ype list, select the protocol. Select either TCP or UDP or TCP/UDP.
9. In the Triggering Port field, enter the number of the outbound traffic port that should open the
inbound ports.
10. Enter the inbound connection port information in the Connection T
ype, Starting Port, and
Ending Port fields.
11. Click the Apply button.
The service is added to the Port Triggering Portmap Table on the Port Forwarding / Port
T
riggering screen. By default, the service is enabled, that is, the Enable check box is
selected.
 To edit or delete a port triggering entry:
1. Select ADVANCED >
Advanced Setup > Port Forwarding / Port Triggering.
The Port Forwarding / Port Triggering screen displays.
2. Select the Port Triggering
radio button.
The screen adjusts to display the port triggering information.
3. In the Port T
riggering Portmap Table, select the radio button next to the service that you
want to edit or delete.