Specifications
Table Of Contents
- CENTRIA
- Contents
- 1. Hardware Setup
- 2. Getting Started with NETGEAR genie
- 3. NETGEAR genie Basic Settings
- 4. NETGEAR genie Advanced Home
- 5. Storage
- 6. ReadySHARE Printer
- 7. Security
- 8. Administration
- 9. Advanced Settings
- 10. Troubleshooting
- A. Supplemental Information
ReadySHARE Printer
79
CENTRIA WNDR4700/WNDR4720
USB Control Center Utility
The USB Control Center utility allows you to control a shared USB device from your
computer that is connected to the USB port on your router. The utility allows you to control a
printer and a scanner.
You have to install the utility on each computer on the net
work from which you want to control
the device. You can download this utility for PC and Mac at
www.netgear.com/landing/en-us/readyshare.aspx.
When you launch the USB Control Center utility, a scree
n similar to the following displays:
The main screen shows a device icon, the description for this USB device, and its status.
Available. Th
e device is available from the computer that you are using.
Waiting to Connect. Y
ou need to connect to this device from the computer that you are
using. If this is the first time you are connecting, you might be prompted to install the device
driver.
Menu selections:
• System. Exit
the utility.
• T
ools. Access the Control Center Configuration to set up your shared USB device. See
the following section, Control Center Configuration.
• About. V
iew details about the USB Control Center software.