User's Manual

USB Storage

N900 Wireless Dual Band Gigabit Router WNDR4500

• To edit a folder, select its radio button, and then click Edit.

3. You can use this screen to select a folder, to change the share name, or to change the read

Access or

write access from All – no password to admin.

The user name (account name) for All – no password is guest. The pa

ssword for admin is

the same one that is used to log in to the router. By default, it is password.

4. Click Apply for yo

ur changes to take effect.

USB Storage Advanced Settings

You can set up the device name, workgroups, and network folders for your USB device. On

the Advanced tab, select USB Storage > Advanced Settings to display the following

screen:

You can use this screen to specify access to the USB storage device.

• Network Device Name. The d

efault is readyshare. This is the name used to access the

USB device connected to the router.

• Workgroup. If you

are using a Windows workgroup rather than a domain, the workgroup

name is displayed here. The name works only in an operating system that supports

NetBIOS, such as Microsoft Windows.

• Access Method

. The access methods are described here.

Network Connection. Enabled by default, this con

nection allows all users on the LAN to

have access to the USB drive.

HTTP.

Enabled by default. You can type http://re

adyshare.routerlogin.net/shares to

access the USB drive.

HTTP (via internet). Disabled by default. If you e

nable this setting, remote users can

type http://<public IP address/shares> (for example, http://1.1.10.102/shares) or a

URL domain name to access the USB drive over the Internet. This setting supports file

uploading only.