User Manual
Table Of Contents
- N750 Wireless Dual Band Gigabit Router
- Contents
- 1. Hardware Setup
- 2. Getting Started with NETGEAR genie
- 3. NETGEAR genie Basic Settings
- 4. NETGEAR genie Advanced Home
- 5. Storage
- 6. ReadySHARE Printer
- 7. Security
- 8. Administration
- 9. Advanced Settings
- 10. Troubleshooting
- A. Supplemental Information
ReadySHARE Printer
61
N750 Wireless Dual Band Gigabit Router WNDR4300
ReadySHARE Printer
You can connect a USB printer to the router USB port, and share it among Windows and Mac
computers on the network.
To set up ReadySHARE Printer:
1. Connect the USB printer to the router USB port with a USB printer cable.
2. Install the USB printer driver software on each computer that will share the printer
. If you do
not have the printer driver, contact the printer manufacturer to find and download the most
recent printer driver software.
3. On each computer that shares the printer
, download the NETGEAR USB Control Center
utility. The NETGEAR USB utility has a Mac version and a Windows version, which you can
access in two different ways:
• From the ReadySHARE Printer area of the page you reach through this URL:
www.netgear.com/readyshare
• From the ReadySHARE tab of genie. (See NETGEAR genie App and Mobile genie
App on page 20).
Note: You have to install this utility before you can use the ReadySHARE
Printer feature. For the ReadySHARE Printer feature to work, this
utility has to be running in the background.