Quick Reference Guide

Management and Monitoring
88
ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP660
The following table explains the fields of the Unknown AP List screen:
3. Click Save to
export the list of unknown or known APs to a file. A window opens so you can
browse to the location where you want to save the file. The default file name is macList.txt.
If you wish, you can now import the saved list into the Known AP List on the Rogue AP
screen (see Enable and Configure Rogue AP Detection on p
age 85).
 To view the Known AP Lists and save it to a file:
1. Select Monitoring > Rogue AP >
Known AP List. The Known AP List screen displays:
Figure 53.
2. Click Refresh to let the wireless access point discover the access points and populate the
Known AP List for the configured wireless modes.
Table 22. Unknown AP List fields
Setting Description
MAC Address The MAC address of the unknown AP.
SSID The SSID that the unknown AP is using.
Privacy Indicates whether security is enabled (1 means enabled; 0 means
d
isabl
ed).
Channel The channel that the unknown AP is using.
Rate The transmit data rate in Mbps of the unknown the AP.
Beacon Int. The interval for each beacon transmission in ms.
# of Beacons The number of beacons transmitted by
the unknown AP that the wireless
access point has detected.
Last Beacon The time stamp that indicates the time when the most recent beacon was
det
ected.