Quick Reference Guide

Management and Monitoring
85
ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP660
Enable Rogue AP Detection and Monitor Access Points
• Enable and Configure Rogue AP Detection
• View and Save Access Point Lists
Enable and Configure Rogue AP Detection
The wireless access point can detect rogue access points and prevent them from connecting
to the wireless access point. The wireless access point maintains a list of access points it
detects in the area. Initially all detected access points are displayed in the Unknown AP List.
You restrict communication to approved access points by adding them to the Known AP List
and enabling the rogue AP detection feature.
If you enable rogue AP detection, the wireless access point continuously scans the wireless
n
e
twork and collects information about all access points on its channel.
Wireless 802.11b, Wireless 802.11bg, or Wireless 801.11ng
and
Wireless 802.11a or Wi
reless 802.11na
Note: The section heading depends on the configured wireless mode.
Unicast Packets The number of unicast packets received and
transmitted over the wireless
connection since the wireless access point was restarted.
Broadcast Packets The number of broadcast packets received an
d transmitted over the wireless
connection since the wireless access point was restarted.
Multicast Packets The number of multicast packets received and transmitted over the wireless
connectio
n since the wireless access point was restarted.
Total Packets The total number of packets received and transmitted over the wireless
connectio
n since the wireless access point was restarted.
Total Bytes The total number of bytes received and transmitted over the wireless connection
since the wireless access point was restarted.
Client Association
802.11b Radio,
802.11bg Radio, or
802.11ng Radio
and
802.11na Radio or
802.11a Radio
The number of associated clients connected to the radio in the configured
wireless modes.
Table 21. Statistics fields (continued)
Setting Description