Quick Reference Guide

Management and Monitoring
72
ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP660
Note: After you have restored the factory default settings on the wireless
access point:
* All custom configurations are lost.
* The login password is p
assword.
* The default LAN IP address is 19
2.168.0.100.
* The DHCP client is disabled.
* The Access Point Name field is rese
t to the name printed on
the label on the bottom of the unit.
Use the Web Management Interface to Restore Factory Default Settings
IMPORTANT:
During the restoration process, do not try to go online, turn off the
wireless access point, shut down the computer, or do anything else
to the wireless access point until it finishes restarting!
 To restore the factory default settings using the web management interface:
1. Select Maintenanc
e > Reset > Restore Defaults. The Restore Defaults screen
displays:
Figure 41.
2. Select the Yes radio button. (By default, the No radio button is selected.)
3. Click Apply to
reset the wireless access point to the factory default settings.
During the restoration process, the wireless access point automa
tically restarts. The
restoration process typically takes about 1 minute. When the Test LED turns off, wait a
few more seconds before doing anything with the wireless access point.