Quick Reference Guide

Management and Monitoring
66
ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP660
Secure Shell and Telnet Management
 To configure remote console features:
1. Select Maintenanc
e > Remote Management > Remote Console. The Remote
Console screen displays:
Figure 35.
2. Enable or disable the remote console features:
• Secure Shell (SSH). T
o enable this feature, select the Enable radio button, which is
the default setting. Select the Disable button to disable the feature.
• Telnet. T
o enable this feature, select the Enable radio button. Select the Disable
button to disable the feature, which is the default setting.
3. Click Apply to save
your settings.
 To manage the wireless access point over a Telnet connection:
1. Connect an Ethernet cab
le to the console port of the wireless access point.
2. Connect the
other end of the cable to a VT100/ANSI terminal or a workstation.
If you attach a PC, Apple Macintosh, or UNIX wo
rkstation, start a secure terminal
emulation program, and configure the terminal emulation program to use the following
settings:
• Baud ra
te: 960
0 bps
• Data bits: 8
• Parity: none
• Stop bit: 1
• Flow control: none
3. Start a secure Telnet session from the terminal or workstation to the wireless access point. A
scree
n similar to the following displays: