Quick Reference Guide

Management and Monitoring

ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP660

Figure 34.

2. Specify the settings as explained in the following table:

3. Click Appl

y to save your settings.

Table 16. SNMP settings

Setting Description

SNMP Select the Enable radio button to allow the SNMP network management

software, such as HP OpenView, to manage the wireless access point

through SNMPv1/v2 protocol. By default, the Disable radio button is

selected.

Read-Only Community Name Enter the community string to allow the

SNMP

manager to read the

wireless access point’s Management Information Base (MIB) objects. The

default is public.

Read-Write Community Name Enter the community string to allow the SNMP manager to read and write

the wirele

ss access point’s MIB objects. The default is private.

Trap Community Name Enter the community string to allow the SNMP man

ager to send traps. The

default is trap.

IP Address to Receive Traps Enter the IP address of the SNMP manager to receive traps sent from the

wireless access

point.

Trap Port Enter the number of the SNMP manager port to receive trap

s sent from the

wireless access point. The default is 162.