Quick Reference Guide

Wireless Configuration and Security
52
ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP660
6. Optional: In the QoS Policies section of the screen, select a QoS policy from the Incoming
drop-down list, Outgoing drop-down list, or both. Depending on your selection, the policy is
applied to incoming packets, outgoing packets, or both incoming and outgoing packets, and
is displayed in the Policy Details fields.
Note: To be able to select a QoS policy, you first need to have configured one
or more policies (see
Co
nfigure Quality of Service Policies on page 113
).
7. Click Apply to save your settings.
Network Authentication
and Data Encryption
(continued)
WPA & WPA2 with
Radius
Configure the RADIUS server setting. TKIP + AES
encryption is the default encryption.
See Configure WPA with RADIUS, WPA2 with RADIUS,
and WPA & WPA2 with RADIUS on p
age 55.
Note: This setting allows clients to connect through either
WPA with
TKIP or WPA2 with AES.
WPA-PSK Enter a WPA passphrase and select TKIP or TKIP + AES
encryption.
See Configure WPA-PSK, WPA2-PSK, and WPA-P
SK &
WPA2-PSK on page 56.
WPA2-PSK Enter a WPA passphrase and select AES or TKIP + AES
encryption.
See Configure WPA-PSK, WPA2-PSK, and WPA-P
SK &
WPA2-PSK on p
age 56.
Note: Select this setting only if all clients support WPA2.
WPA-PSK &
WPA2-PSK
Enter
a WPA passphrase. TKIP + AES encryption is the
default encryption.
See Configure WPA-PSK, WPA2-PSK, and WPA-PSK &
WPA2-PSK on p
age 56.
Note: This setting allows clients to connect through either
WPA with TKIP or WPA2 with AES.
Wireless Client Security
Sepa
ration
If you enable wireless client security separation by selecting Enable from the
drop-down list, the associated wireless clients cannot communicate with each
other. By default, Disable is selected from the drop-down list. This feature is
intended for hotspots and other public access situations.
VLAN ID Enter the VLAN ID to be associated with this wireless security profile. The
default
VLAN ID is 1. The VLAN ID needs to match the VLAN ID that is used by
the other devices in your network.
Table 10. Profile authentication settings (continued)
Setting Description