Quick Reference Guide

Advanced Configuration
128
ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP660
 To configure the wireless access point to repeat the wireless signal:
1. Configure the security profiles on the wireless access point (AP2 in the previous figure):
a. Select Configuration > W
ireless Bridge. The Bridging screen displays (see the
following figure).
b. Optional: To display the Bridging screen for the 802.11a/na modes, click the 802.
11a/na
tab.
c. Select the Enable W
ireless Bridging check box. The Local MAC Address field is a
nonconfigurable field that shows the MAC address of the wireless access point.
d. Select the Wireless Point-to-Multi-Point Bridge radio butto
n. The screen adjusts.
Figure 74.
e. The profile table shows four security profiles. Choose a security profile to edit by
selecting the corresponding radio button to the left of the profile.
f. Click Edit to configur
e the selected security profile settings. The Edit Security Profile
screen displays for the selected security profile. (The following figure contains an
example.)