Quick Reference Guide

Advanced Configuration
116
ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP660
Match Frame
Fields and Match
Classifications
(continued)
802.1P From the Match Classifications drop-down list, select the CoS priority
value against which the information in the IP header needs to be
matched:
• Routine(0)
• Priority(1)
• Immediate(2)
• Flash(3)
• Flash Override(4)
• Critic/CCP(5)
• Inter Control(6)
• Network Control(7)
IP Protocol In the Match Classifications field, enter the IP protocol value against
which the information
in the IP header needs to be matched. A list of
protocol values is available at
http://www.iana.org/assignments/protocol-numbers/protocol-numbers.xml.
Ether Type In the Match Classifications field, ente
r the Ether type value against
which the information in the IP header needs to be matched. A list of
Ether type values is available at
http://standards.ieee.org/develop/regauth/ethertype/eth.txt.
Source MAC In the Match Classifications field, select or enter the source MAC
addres
s against which the information in the IP header needs to be
matched.
To select the MAC address of a wireless client
that is connected to the
wireless access point:
1. Select the radio button to the left of the Match Classifications
drop-do
wn list.
2.
From the drop-down list, select a MAC address.
To enter a MAC address:
1. Select the radio button to the right of the Match Classifications
drop-do
wn list.
2.
In the field to the right of the
radio button, enter a MAC address.
Destination
MAC
In the Match Classifications field, select
or enter the destination MAC
address against which the information in the IP header needs to be
matched.
To select the MAC address of a wireless client
that is connected to the
wireless access point:
1. Select the radio button to the left of the Match Classifications
drop-down list.
2.
From the drop-down list, select a MAC address.
To enter a MAC address:
1. Select the radio button to the right of the Match Classifications
drop-do
wn list.
2.
In the field to the right of the
radio button, enter a MAC address.
Table 33. QoS classification settings (continued)
Setting Description