Operation Manual

Get Started and Connect to a WiFi Network
12
N600 WiFi USB Adapter
4. Expand the Manually Connect to a network (for hidden networks) section.
5. Select the Use WPS Push 'N' Connect radio button and click the Start button.
6. To learn more about how to connect to the network using WPS, click the Learn More button.
7. Press and hold the WPS button on the adapter for two seconds.
The adapter LED blinks.
8. Within two minutes, press the WPS button on your WiFi router or access point.
The adapter joins the network, which can take a few minutes. Your settings are saved in a
profile.
The Join a Network screen shows that the adapter is connected to the network, and the
genie status bar at the bottom of the screen displays information about the network
connection. For more information about the status bar
, see Check Your Connection
Status on page 17.