Reference Manual

Hardware Setup

Outdoor High Power Wireless N Access Point

System Requirements

Before installing the access point, make sure that your system includes the following:

• A 10/10

0/1000 Mbps local area network device such as a hub or switch, supporting IEEE

802.3af\ Power over Ethernet (PoE).

• The Catego

ry 5 UTP straight-through Ethernet cable with RJ-45 connector included in the

package, or one like it

• A web browser for configuration

• At lea

st one computer with the TCP/IP protocol installed

• 802.1

1b/g/n-compliant or 802.11a/n-compliant devices

Unpack Your Access Point

Your package contains the following items.

Wall-mounting bracket

Bracket

Pole-mount clamps (2)

Weatherproof

Access point

cable glands (3)

Grounding

screws (2)

screws (4)

Figure 1. Package contents