Data Sheet

ProSAFE® Wireless-N Access Point Data Sheet
WNAP320
Page 2 of 3
Features
ProSAFE
Wireless-N
Access Point
(WNAP320)
ProSAFE
Dual Band
Wireless-N
Access Point
(WNDAP350)
ProSAFE
Wireless-N
Access Point
(WNAP210)
Frequency 2.4GHz 2.4GHz and 5.0GHz 2.4GHz
Maximum theoretical throughput 300Mbps 600Mbps 300Mbps
Power over Ethernet (PoE) IEEE 802.3af Yes Yes Yes
PoE power consumption 5.8 Watts 12.7 Watts 6 Watts
Wireless Distribution System (WDS)
Repeater Yes Yes Yes
Bridge point-to-point/multi-point Yes Yes Yes
Simultaneous bridge & wireless client association Yes Yes Yes
Separate bridge and access point Yes Yes Yes
Client Mode Yes Yes Yes
SNMP v1, v2c v1, v2c v1, v2c
Antenna Internal 5dBi
Two (2) external reverse
SMA connectors
Internal 5dBi
Two (2) external reverse
SMA connectors
Internal 3dBi
User Support (standalone/controller management) Up to 64 users Up to 128 users Up to 32 users
Security Yes Yes Yes
WiFi Protected Access (WPA/WPA2), 802.11i Yes Yes Yes
Multiple VPN pass-through support Yes Yes Yes
MAC address filtering with access control lists–up to 256 users Yes Yes Yes
802.1x RADIUS support with EAP TLS, TTLS, PEAP Yes Yes Yes
Rogue AP detection Yes Yes Yes
Block SSID Broadcast Yes Yes Yes
Secure SSH Telnet Yes Yes Yes
Secure Socket Layer (SSL) Yes Yes Yes
Remote management login Yes Yes Yes
Peer-to-peer blocking so users may not access another user’s PC Yes Yes Yes
MBSSID/VLAN Support 8/9 16/17 8/9
WPA Support (WPA2 – Enterprise, 802.11i) Yes Yes Yes
User Interface Yes Yes Yes
Browser-based Interface Yes Yes Yes
Accepts accessory antennas Yes Yes
Controller management WC7520, WC7600, WC9500 WC7520, WC7600, WC9500 WC7520, WC7600, WC9500