User manual
Table Of Contents
- ProSafe Wireless-N Access Point WNAP210
- Contents
- 1. Getting Started
- 2. Installation and Configuration
- Wireless Equipment Placement and Range Guidelines
- Prepare to Install the Access Point
- Connect to the Access Point
- Log In to the Access Point
- Configure LAN Settings
- Set Basic IP Options
- Set Up and Test Basic Wireless Connectivity
- QoS Settings
- Deploy the Access Point
- Wireless Security Options
- Security Profiles
- Restrict Wireless Access by MAC Address
- 3. Management
- 4. Monitoring
- 5. Advanced Configuration
- 6. Troubleshooting and Debugging
- A. Supplemental Information
- B. Command Line Reference
- C. Notification of Compliance
- Index
Monitoring
45
ProSafe Wireless-N Access Point WNAP210
You can click Refresh to update the statistics information for each interface.
The following information fields are displayed on the Statistics screen.
• Packets. The number of packets sent and received since the access point was restarted.
• Bytes. The number of bytes sent and received since the access point was restarted.
• Unicast Packets. The unicast packets sent and received since the access point was
restarted.
• Multicast Packets. The broadcast packets sent and received since the access point was
restarted.
• Total Packets. The wireless packets sent and received since the access point was
restarted.
• Total Bytes. The wireless bytes sent and received since the access point was restarted.