Quick Reference Guide
Table Of Contents
- ProSafe Wireless-N Access Point WNAP210 Reference Manual
- Contents
- Chapter 1 Introduction
- Chapter 2 Installation and Configuration
- Wireless Equipment Placement and Range Guidelines
- Understanding WNAP210 Wireless Security Options
- Installing the WNAP210 Wireless Access Point
- Deploying the Access Point
- Mounting the Access Point Using the Wall Mount Kit (Optional)
- Setting Basic IP Options
- Wireless Settings
- Setting Up and Testing Basic Wireless Connectivity
- Understanding Security Profiles
- Chapter 3 Management
- Remote Management
- Remote Console
- Upgrading the Wireless Access Point Software
- Managing the Configuration File
- Restoring the WNAP210 to the Factory Default Settings
- Changing the Administrator Password
- Enabling the Syslog Server
- Using Activity Log Information
- Viewing General Summary Information
- Viewing Network Traffic Statistics
- Viewing Available Wireless Station Statistics
- Enabling Rogue AP Detection
- Viewing and Saving AP Lists
- Chapter 4 Advanced Configuration
- Chapter 5 Troubleshooting and Debugging
- No lights are lit on the wireless access point.
- The Wireless LAN LED does not light up.
- The Ethernet LAN LED is not lit.
- I cannot access the Internet or the LAN with a wireless- capable computer.
- I cannot connect to the WNAP210 to configure it.
- When I enter a URL or IP address, I get a time-out error.
- Using the Restore Factory Settings Button to Restore Default Settings
- Appendix A Default Settings and Technical Specifications
- Appendix B Related Documents
- Appendix C Command Line Reference
- Index
ProSafe Wireless-N Access Point WNAP210 Reference Manual
4-8 Advanced Configuration
v1.0 March 2009
Table 4-1 describes the settings for QoS queues.
Table 4-1. QoS Queues and Parameters
QoS Queue Description
Data 0 (Voice) High-priority queue, minimum delay. Time-sensitive data such as VoIP
and
streaming media are automatically sent to this queue.
Data 1 (Video) High-priority queue, minimum delay. Time-sensitive video data is
automatica
lly sent to this queue.
Data 2 (Best Effort) Medium-priority queue, medium thro
ughput and delay. Most traditional
IP data is sent to this queue.
Data 3 (Background) Lowest-priority queue, high throughput. Bulk data that requires
maximum th
roughput and is not time-sensitive is sent to this queue
(FTP data, for example).
AIFS (Arbitration Inter-Frame
S
pace)
Specifies a wait time (in milliseconds) for data frames. Valid values for
AIFS are 1 through 255.
cwMin (Minimum Contention
Win
dow)
Upper limit (in milliseconds) of a range from which the initial random
backoff wait time is determined. Valid values for the cwMin are 1, 3, 7,
15, 31, 63, 127, 255, 511, and 1024. The value for cwMin must be lower
than the value for cwMax.
cwMax (Maximum Contention
Win
dow)
Upper limit (in milliseconds) for the doubling of the random backoff
value. Valid values for the cwMax are 1, 3, 7, 15, 31, 63, 127, 255, 511,
and 1024. The value for cwMax must be higher than the value for
cwMin.
Max. Burst Length Specifies (in milliseconds) the maximum burst length allowed for packet
burst
s on the wireless network. A packet burst is a collection of multiple
frames transmitted without header information. Valid values for
maximum burst length are 0.0 through 999.9.
Enabling Wireless Bridging and Repeating
The ProSafe Wireless-N Access Point lets you build large bridged wireless networks. Select the
wireless access point mode you want to use for your environment:
• W
ireless Point-to-Point Bridge. In this mode, the WNAP210 can communicate with another
bridge-mode wireless station and with wireless clients if you select the Enable Wireless
Client Association check box. To associate wireless clients with this access point, select
clients from the list in the Enable Wireless Clients Association table, and select the
corresponding check box in the Enable column.