Quick Reference Guide
Table Of Contents
- ProSafe Wireless-N Access Point WNAP210 Reference Manual
- Contents
- Chapter 1 Introduction
- Chapter 2 Installation and Configuration
- Wireless Equipment Placement and Range Guidelines
- Understanding WNAP210 Wireless Security Options
- Installing the WNAP210 Wireless Access Point
- Deploying the Access Point
- Mounting the Access Point Using the Wall Mount Kit (Optional)
- Setting Basic IP Options
- Wireless Settings
- Setting Up and Testing Basic Wireless Connectivity
- Understanding Security Profiles
- Chapter 3 Management
- Remote Management
- Remote Console
- Upgrading the Wireless Access Point Software
- Managing the Configuration File
- Restoring the WNAP210 to the Factory Default Settings
- Changing the Administrator Password
- Enabling the Syslog Server
- Using Activity Log Information
- Viewing General Summary Information
- Viewing Network Traffic Statistics
- Viewing Available Wireless Station Statistics
- Enabling Rogue AP Detection
- Viewing and Saving AP Lists
- Chapter 4 Advanced Configuration
- Chapter 5 Troubleshooting and Debugging
- No lights are lit on the wireless access point.
- The Wireless LAN LED does not light up.
- The Ethernet LAN LED is not lit.
- I cannot access the Internet or the LAN with a wireless- capable computer.
- I cannot connect to the WNAP210 to configure it.
- When I enter a URL or IP address, I get a time-out error.
- Using the Restore Factory Settings Button to Restore Default Settings
- Appendix A Default Settings and Technical Specifications
- Appendix B Related Documents
- Appendix C Command Line Reference
- Index
Figure 2-13
ProSafe Wireless-N Access Point WNAP210 Reference Manual
2-28 Installation and Configuration
v1.0 March 2009
3. Enter the following RADIUS server settings:
• Authentication Se
rver. This configuration is required for authentication using a RADIUS
server.The IP address, port number, and shared secret are required for communication with
the primary RADIUS server. You can also configure a secondary RADIUS server to use, if
the primary RADIUS server fails.
– IP Addr
ess. The IP address of the RADIUS server. The default is 0.0.0.0.
– Port. The p
ort number of the RADIUS server. The default is 1812.
– Shar
ed Secret. This is shared between the wireless access point and the RADIUS
server when the supplicant (wireless client) is authenticated.
• Acc
ounting Server. This configuration is required for accounting using a RADIUS
server. The IP address, port number, and shared secret are required for communication
with the primary RADIUS server. You can also configure a secondary RADIUS server to
use if the primary RADIUS server fails.
– IP Addr
ess. The IP address of the RADIUS server. The default is 0.0.0.0
– Port.
Port number of the RADIUS server. The default: 1813
– Shar
ed Secret. This is shared between the wireless access point and the RADIUS
server while authenticating the supplicant (wireless client).
4. Click Ap
ply to save your settings.