User's Manual

Getting Started

Universal Dual Band WiFi Extender – Desktop/Wallplug

 To cable a computer to the extender:

1. Locate the ports on the extender.

Ethernet port

USB port

2. Use an Ethernet cable or USB cable to connect your computer the extender.

3. Plug in the AC adapter or attach the stand and power adapter cord to the extende

r, and

then plug it into an electrical outlet.

If you want to log in to the extender, see Log In to the Extender on page 17.

 To use the extender as a one-port WiFi adapter:

1 Make sure that th

e extender is connected to your existing wireless WiFi network.

2 Plug the Ethernet

cable from your Ethernet-enabled device (connected TV, Blu-ray player,

gaming console) to the Ethernet port of the extender.

Install the Extender

 To install the extender:

1 Either connect the AC plug, or attach the stand and the power adapter cord.

2 Find a place to install the extender that is about halfway between the router and the

comput

er or wireless device that is outside of the range of the router.

DO DON’T

If you have to use a different location, see Position the Extender on page 14.

3 Power up

the extender.

• If you connected th

e AC plug to the extender, plug it directly into an electrical outlet.

• If you attached the st

and and power adapter, plug the power adapter into an electrical

outlet.