User Guide

Command-Line Reference
122
ProSAFE Single Band 802.11n Wireless Access Point WN203
|-exit --Logout from CLI
|-firmware-upgrade --Upload new system firmware file from
| FTP server
|-firmware-upgrade-tftp --Upload new system firmware file from
| TFTP server
|-reset-ap --Reset the ap
|-restore-configuration --Restore system configuration
|-restore-default-password --Restore default system password
|-restore-factory-default --Restore default system configurations
|-save-and-activate –-Save and activate configuration
|-show> --Show system settings
| |-country --Show Country
| |-dhcp --Show DHCP settings
| |-ethernet> --Ethernet interface
| | |-statistics --Show ethernet statistics
| |-hotspot --Show hotspot settings
| |-ip> --IP settings
| | |-config --Show IP configurations
| | |-status --Show IP status
| |-log --Show system logs
| |-name --Show ap name
| |
| |-radio>
| | |-2.4 --Show 2.4GHz wlan interface settings
| | |-2.4> --2.4GHz wlan interface settings
| | | |-associated-client --Associated client(s)
| | | |-macacl --Wireless access control (ACL) mac
| | | | address list
| | | |-rogue-ap-detection> --Rogue ap detection
| | | | |-known> --Known
| | | | | |-scanned --Scanned list
| | | | | |-config --Config list
| | | | |
| | | | |-unknown --Unknown list
| | | |
| | | |-station-list --Station list
| | | |-statistics --Interface statistics
| | | |-wds> --Wireless bridge settings
| | | | |-1 --1st security profile
| | | | |-2 --2nd security profile
| | | | |-3 --3rd security profile
| | | | |-4 --4th security profile
| | | |
| | | |-wlan> --VAP settings
| | | | |-1 --1st security profile
| | | | |-2 --2nd security profile
| | | | |-3 --3rd security profile
| | | | |-4 --4th security profile
| | | | |-5 --5th security profile
| | | | |-6 --6th security profile