User Guide

Supplemental Information
111
ProSAFE Single Band 802.11n Wireless Access Point WN203
Antenna Internal
802.11d Enabled
Client isolation Disabled
Maximum wireless clients 64
Wi-Fi Multimedia (WMM) Enabled
WMM powersave Enabled
AP EDCA parameters (QoS settings)
See the table in Configure
Advanced Quality of
Service Settings on page 73.
Station EDCA parameters (QoS settings)
Wireless bridging Disabled
Default wireless profile and profile security
Profile name NETGEAR
Profile state Enabled
Wireless network names (SSIDs) NETGEAR_1
1ng
Broadcast wireless network names (SSIDs) Enabled
Network authentication Open system (no authentication)
Data encryption None
Wireless client security separation Disabled
VLAN ID 1
Wireless security features
Rogue AP detection Disabled
MAC authentication Disabled
RADIUS servers None
RADIUS authentication port number 1812
RADIUS shared secret sharedsecret
RADIUS accounting port number 1813
RADIUS reauthentication time 3600 seconds
RADIUS update of the global key 1800 seconds
Table 6. Default configuration settings (continued)
Feature Description