Installation Guide

9
3. Find the new WiFi booster network name.
The WiFi booster’s network name (SSID) changes to your
existing WiFi network name, with _EXT at the end of the name.
For example:
• Existing WiFi network name. MyNetworkName
• New extended network name. MyNetworkName_EXT
4. Connect your existing WiFi devices to the new extended network
(MyNetworkName_EXT).
Use the same WiFi password that you use for your WiFi router.
5. Unplug the WiFi booster and move it to a new location closer to the
area with a poor WiFi signal.
The location you choose must be within the range of your existing
WiFi router network.
6. Plug the WiFi booster into an electrical outlet and wait one minute.
The Status LED lights green. If the Status LED does not
light, press the On/Off button.
Use the Link Rate LED on the front panel to help you choose a
spot where the WiFi booster-to-router connection is optimal.
DO DON’T