Reference Manual

Monitoring

ProSafe 16 AP Wireless Management System WMS5316

Monitoring Summary

This screen displays a read-only summary of the current managed access point status, rogue

access points detected, current wireless stations connected, wireless management system

information, and network usage. Clicking the individual sections leads to a new screen

showing greater detail.

Access Point Status

This section displays status of managed access points.

• Total Configured: Total number of managed access points.

• Down: Number of managed access points that cannot be pinged.

• Critical: The wireless management system can ping these managed access points, but

either cannot log in or has detected that the device is different from the one that was

configured.

• Major: Number of managed access points whose configuration differs from the one that is

set on the wireless management system. This is most likely due to an access point

running old firmware or because the wireless management system changed the

configuration when the access point was down or offline.

• Healthy: Managed access points are running correctly.

Rogue Access Points

This section displays the count of rogue or neighboring access points discovered by

managed access points.

• Rogue AP current: The number of unique rogue or neighboring access point BSSID that

can be observed now.

• Rogue AP count 24hrs: The number of unique rogue or neighboring access point BSSID

observed over the last 24 hours.